Specialist engine cooling systems advice

Good quality engine coolant contains various additives that will protect the system in different ways. Over time these additives will start to break down and lose their effectiveness and at this point the performance of the cooling system components will be compromised due to factors such as corrosion or build-up of foreign particles on the surfaces of the various components. This will impair the performance of the system and may lead to more expensive repairs at a later stage.

In order to maintain the system at optimal performance levels it is recommended to replace the coolant and flush the system from time to time. Please contact your local Silverton Radiators outlet and they will gladly assist.

Radiator and intercooler re-coring or refurbishment

Certain types of radiators and intercoolers / charge air coolers can easily be re-cored as a cost effective alternative to replacing a part with a new one. Another alternative for copper brass type radiators may be to repair or refurbish the item if damage is not too extensive.

Custom-made parts as per customer requirements

Whatever you engine cooling needs may be we are able to make a wide variety of parts in differing configurations.

Sales of quality replacement parts

We stock the largest range of parts for both engine cooling systems as well as automotive airconditioning (a/c) systems.  We specialize in the following parts :

• Radiators
• Condensers
• Intercoolers
• Oil coolers
• Radiator and intercooler cores
• Electric engine cooling fans
• Electric airconditioning (a/c) system fans /auxiliary fans
• Viscous couplings/clutches (including Vistronic systems for large trucks)
• Fan wheels
• Radiator hoses
• Thermostats
• Water pumps
• Expansion tanks for trucks
• Radiator caps /pressure caps
• Electronic engine protection systems
• Ventilation blowers
• Blower resistors
• Pollen/carbon/cabin filters

Parts are sold under the Behr Hella Service brand.

Specialized systems and component testing

Correctly diagnosing a problem depends not only on understanding how a system works but also on performing various checks and tests and then knowing how to correctly interpret the results. The following are some of the checks and tests that may be done by your local Silverton Radiators outlet when diagnosing a problem :

Tracing cooling system leaks. This might be done by any one or a combination of the following :

• Visual inspection
• Using a special dye and ultraviolet light
• Pressure testing the cooling system as a whole

Pressure testing the radiator cap to ensure correct system pressures during operation.

Testing for combustion gas leaks which might indicate a blown cylinder head gasket or even a cracked cylinder head.

Testing for the presence of stray currents which could cause the destruction of engine cooling system components by electrolysis.

Checking for correct antifreeze levels

For any specific diagnosis you might need and for all your engine cooling problems in general please contact your local Silverton radiators outlet and they will be happy to assist.

Expert cooling system troubleshooting, service and repair

Modern vehicle systems are becoming ever-more complex. Understanding how the different subsystems in a vehicle work together is not as easy as it used to be unless you are really an expert. Engine cooling systems are no exception and when it comes to this subject, Silverton Radiators is your expert. Starting with the correct diagnosis through to providing the right solution Silverton Radiators is your best choice. Contact your local Silverton Radiators outlet and they will get right to it.